Ghost Immobiliser Fitting
Secure your vehicle from key theft hacking, cloning, and theft with the world's first aftermarket immobiliser for CAN. The Ghost app and GPS tracking can be linked to the immobiliser, which will send you alerts when your car is taken or damaged.
The installation of a Ghost immobiliser can be completed by a certified technician. The right tools, insulation tape, and heat shrink tubing is essential.
Getting Started
Ghost immobilisers are an excellent alternative to physical theft protection devices such as wheel locks and car alarms. They guard your vehicle without the use of LED indicators or key fobs. Instead, they connect directly to the ECU's CAN data network and can only be started after entering a PIN code sequence. This provides a higher level of protection against key hacking, ECU swapping and cloning.
Installing a ghost immobiliser Birmingham requires a high degree of agility and precision. It's like walking through an icy minefield. One mistake could cause severe damage to the circuits of the electrical system of your vehicle. To avoid this, it's crucial that you understand the procedure for installing and prepare your vehicle appropriately.
You will need to remove interior panels from the vehicle to make space for your immobiliser. Once you've located the perfect location to hide it, secure it in place using cable ties to prevent it from being removed or altered. Clean up your wiring by making sure that loose wires are tied down and using insulation tape to cover the exposed connections. This can help minimize the risk of accidental short circuits as well as improving the appearance and reducing the possibility of tampering with by thieves.
Find a reliable source of 12V power, as well as a grounding for the ghost immobiliser. Once you've found these, test the power wires using a multimeter to ensure they are delivering a consistent voltage. Connect the CAN H and CAN L wires of the immobiliser with the grounding and power points.
Once you've made all of the necessary connections It is important to check the connections and examine the immobiliser for signs of corrosion or other damage. Entering a PIN and starting the car is a great method of testing the system. This should be a regular part of your routine, as it will help to spot any intermittent issues early on. Regular testing will help prolong the life of your device and ensure it is running at its peak.
Preparing the Vehicle
The installation of the Ghost immobiliser is a complex task that requires tools and expertise. A wiring diagram of the vehicle is vital to identify the proper wires and establishing precise connections, while a multimeter is a great tool to check the electrical properties and ensure safety. Cable tie and insulation tape can be used to secure connections and prevent tampering. Finally, a user manual will give you specific instructions specifically tailored to your Ghost Immobiliser model.
Once installed, a ghost immobiliser is able to stop unauthorised engine starts by requiring the owner to input a unique PIN code sequence by pressing buttons on the steering wheel or centre console. The code can be altered at any time by the owner either by hand or remotely through a mobile app. The device is also silent and is unnoticeable to thieves as it doesn't emit radio frequencies.
Ghost immobilisers are directly connected to the CAN bus of the vehicle, a network that communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals from the ECUs and blocks the engine from running if it detects a false signal. The system is weatherproof and tamper-proof. It doesn't have any keys or LED indicators to draw the attention of thieves.
It can be positioned behind or in a less visible area to ensure that it isn't easily spotted by thieves and does not interfere with vehicle performance. It can be placed in a small container so it is less likely to be spotted by fraudulent salespeople when they test drive.
Its stealthy operation, combined with its integration into the vehicle's CAN-bus system is an effective deterrent to modern vehicle theft techniques such as signal relay attacks and key copying. Combining the system with other security measures will create a formidable barrier that can deter even the most persistent of thieves. A growing number of insurance companies suggest or require ghost immobilisers because they can cut down on monthly premiums.
Making Connections
Contrary to traditional security systems which can be heard by thieves, ghost immobilisers operate in a quiet manner to prevent them from knowing when your vehicle has been switched on. They also block high-tech methods used to steal vehicles like OBD port hacking. Installing them without leaving permanent marks on your vehicle is an excellent alternative for those planning to sell their vehicle in the near-future.
The Autowatch Ghost 2 is a immobiliser CANbus that is among the most reliable and modern solutions to protect your car from theft. It disables your engine using the CAN data network and generates a unique PIN number that is difficult for criminals. It is compatible with many different automobiles, and it can work with a variety of features already installed, such as car alarms, steering wheel locks, GPS trackers and door lock bypass.
If you decide to go with an Ghost immobiliser, be sure to refer to the wiring diagram of your specific vehicle model to determine the wires to connect. Verify their positions to ensure they're accurate, and label them or tape them to help you keep track of them. car ghost immobiliser will also need to find a source of constant power (12V) and an earthing point for the system. Once you have all the required components, you can begin making the connections to complete the installation.
When the ghost immobiliser is connected to your CAN bus, it will prevent your vehicle from starting unless you enter a pin number using the buttons on the dashboard or steering wheel. This will stop ECU hacking, key cloning, and other methods of theft. In addition, it could be paired with other approved by Thatcham security equipment, such as alarms and tyre clamps, to give your car an additional level of protection.
As the UK automotive aftermarket market grows, so are the options for securing your vehicle. There are many ways for thieves to get into your car and take it, therefore it's vital to do all you can to prevent it from being taken. That's why ghost immobilisers have become very popular among responsible car owners.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU via a CAN network. This prevents the engine from starting until the PIN code has been entered. This makes it extremely difficult for thieves to copy your key fob and then start your vehicle, and more difficult to disable the system through hacking into its electronic components.
Ghost Immobilisers can also be used in conjunction with GPS tracking devices to help you locate your vehicle in the event that it is stolen. This feature is not an option that is commonly used in security products that are available from the market however it's a great option to increase your security and provide assurance that your vehicle is protected.
In addition to offering enhanced security and security, in addition to providing enhanced security, the Ghost-II immobiliser provides a simple user experience by eliminating the need for additional key fobs or devices. It features a simple, user-friendly PIN code entry that integrates seamlessly with your daily routine. It also comes with convenience features and deactivation settings that allow you to temporarily disable the immobiliser so that you can park or service your vehicle.
Before beginning the installation process, you should familiarize yourself with the vehicle's wiring and prepare the necessary tools. A basic set of hand tools will allow you the flexibility to make precise connections, while a multimeter will help check electrical values. Insulation tape and heat-shrink tubing are essential to safeguard connections from short circuits. Cable ties can be used to secure wiring. It's also important to work in a place which is well-lit and wear safety equipment when working with electrical tools and components.
You should test the Ghost immobiliser once you have completed the installation to verify that it's functioning properly. First, you should try to start the vehicle without entering the PIN code. If this fails, you will need to try again and check the connections more thoroughly.
The Ghost Immobiliser, unlike other security systems is a covert device which cannot be recognized by thieves. It is also far more efficient than physical deterrents, such as wheel clamps and steering locks. It is TASSA recognized and approved by a few insurance companies, which makes it a cost-effective investment that can give you the peace of mind that you deserve.